How to Repair the CPU Fan Error Technically in BIOS

Understand the Meaning of CPU Fan Error; You may have experienced the CPU (Central Processing Unit) fan error notification on your computer. It is a general error that arrives when you turn on your system. It is an alert message that appears when the PC or laptop shuts down automatically due to excessive heating. Also, it occurs when the CPU fan cannot cool off other PC components.

It is troublesome when the PC shuts down immediately due to improper functioning of the CPU fan. However, the forced closing down of PC indicates it is safe and secure. Still, failure of CPU fans leads to extreme heating of computer that can cause lasting wear and tear of computer parts.

Various Causes of CPU Fan Glitch

There are many causes for CPU fan error alerts. The general thing that can cause CPU fan failure is dirt particles. Filth gets collected in the PC or laptop that avert the heatsink metal to function suitably. Consequently, it gets problematic for the system to air-cool resulting in the CPU fan glitch.

Besides, a damaged or inaccurately attached CPU fan is a further reason for CPU fan error notifications. Luckily, you have the option to repair the CPU fan error without the support of a PC repair person.

How does the CPU Fan Error Flashes?

Usually, the CPU fan error flashes when you initiate or boot the computer. This alert does not emerge when the Windows PC function normally. You may notice the CPU fan error notifications in the ways given below:

  • CPU Fan Error (Generic)
  • Error: CPU Fan Has Failed (ASUS)
  • CPU fan speed error detected. (American Megatrends)
  • CPU fan error, Please check! (MSI)
  • System Fan (90B) (Compaq/HP)

Methods to Repair the CPU Fan Error Using BIOS Utility

You may use the BIOS setup at intervals to mend technical errors. To repair the CPU fan error technically, examine the settings of the CPU fan in the BIOS setup. To do this task, track the below methods:

Method 1: Modify the CPU Fan Settings in the BIOS Setup

Visit BIOS Settings

Firstly, proceed to BIOS utility on your computer/laptop.

Advanced Settings

After that, choose the Advanced Settings option.

Hardware Monitor & CPU Fan Selection

Next, select Hardware Monitor —> CPU Fan.

Enable Active Heat Sink

Now, activate Active Heat Sink and Fan Duct with Fan.

Disable Passive Heat Sink

Deactivate Passive Heat Sink and Fan Duct without Fan.

Tap Save

Press the Save button to save the modifications applied.

Exit the BIOS Settings

Finally, adieu to the BIOS Settings.

Note: Noticing the CPU fan error warning, you may be encouraged to hit the F1 key. On tapping the F1 button, the BIOS utility will appear too.

Method 2: Modify the BIOS Setup

If you are confident that your computer or laptop is not getting ultrahot and the CPU fan is functional, modify the BIOS utility. Applying this edit in BIOS in Method 1 can avoid the CPU fan error alert. Plus, your system will function adequately.

To revise the BIOS setup, use the below steps:

  1. At first, trigger BIOS utility.
  2. Next, pick the Monitor option.
  3. Under Monitor, choose the Fan Speed Monitor option.
  4. Press N/A —> Ignore —> Exit.
  5. Finally, press on the Save option to confirm BIOS modifications.

Note: Make changes in the BIOS setup only if you are assured that the CPU fan is functioning accurately. Otherwise, bear in mind that applying these modifications may impact your system’s power to notice CPU fan failures and unnecessary heating of components.

Final Thoughts on Repair the CPU Fan Error

We expect that the implication, causes, message arrival, and methods of fixing the CPU fan failure technically via BIOS are coherent to you. Therefore, use the preceding techniques to settle CPU fan error notification. If the above tricks do not work, try cleaning or replacing the CPU fan.

Must Read: ImageTwist Tech Apps for Windows 11 & Windows 10 PC

Leave a Comment

Your email address will not be published.

Scroll to Top